How to Repair iPhone X Touch —— OCA Lamination Machine Tutorials

0 comments

Hello everybody! Now we are in the FORWARD repair working room. You can get OCA Lamination Machine Tutorials here for your reference. Today our task is to finish laminating four iPhone X LCDs. The problem for these four LCDs is the touch screen is not to display and the touch is unwork, so how can we repair them?

How to Repair iPhone X Touch —— OCA Lamination Machine Tutorials

Now let’s see how to do that.

Our engineer has removed their touch screens from the LCDs and stuck the OCA to the new touch screens by FORWARD’s universal laminating mold and RMB-2 OCA lamination machine in advance.

How to Repair iPhone X Touch —— OCA Lamination Machine Tutorials

The next part is laminating a new touch screen to the LCD.

At first, we would align the touch screen to the LCD by using FORWARD’s iPhone X special base.

How to Repair iPhone X Touch —— OCA Lamination Machine Tutorials

In the positioning, it is a last but very important step is we need to click the middle of the screen gently with two fingers to make the touch and LCD do a preliminary lamination and then fix the position.

How to Repair iPhone X Touch —— OCA Lamination Machine Tutorials

After that, we put the screen into RMB-2 laminating machine for bonding.

How to Repair iPhone X Touch —— OCA Lamination Machine Tutorials

For this lamination, we select the LCD laminating mode.

How to Repair iPhone X Touch —— OCA Lamination Machine Tutorials

The vacuum time we set is 30s and the lamination time is 20s, the time for the whole process is about 50s.

How to Repair iPhone X Touch —— OCA Lamination Machine Tutorials

While we wait for this laminating process, we can do the second lamination directly. The operation is the same as last one.

How to Repair iPhone X Touch —— OCA Lamination Machine Tutorials

Time’s up! We take the screen out. Here we can see except for the left upper corner has a few bubble, the other place is almost no bubble. Its effect looks perfect.

How to Repair iPhone X Touch —— OCA Lamination Machine Tutorials

After the lamination, the next part we need to do is change the touch cable.

How to Repair iPhone X Touch —— OCA Lamination Machine Tutorials

The first thing we have to do is remove the original touch cable by using soldering iron and clean up the residual part.

How to Repair iPhone X Touch —— OCA Lamination Machine Tutorials

Then we plug a new connection cable with tin by using soldering iron again.

How to Repair iPhone X Touch —— OCA Lamination Machine Tutorials

We can test the effect once the touch cable and the LCD have been connected.

How to Repair iPhone X Touch —— OCA Lamination Machine Tutorials

The test result is that the touch and the display are normal now after the restore.

How to Repair iPhone X Touch —— OCA Lamination Machine Tutorials

In the last step, we will put these screens into the machine for bubble removing.

How to Repair iPhone X Touch —— OCA Lamination Machine Tutorials

So today’s task is finished and the result is great.

If you have any problem, please contact with us directly.

Thank you for your read.

Leave a comment

All blog comments are checked prior to publishing
[time] minutes ago, from [location] vor [time] Minuten, von [location]
The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
You have successfully subscribed!