Get an instant quote from our most experienced consultants.

The Best Way To Replace iPhone XR Back Glass

admin
June 21, 2022
Difficulty
★☆☆ Low
Step
5
Required Time
10 minutes

Excerpt

Do you know the way to keep the thickness of iPhone XR is as same as that of the original after changing a new back glass? Maybe you know how to replace the back glass, but do not know how to make the thickness be the same as the original.

Accessories

Blue Light Laser Separation Machine, a blade, a sharp knife, clean cloth, alcohol, glue, glue maker, a new XR back glass, four clamping tools

Do you know the way to keep the thickness of iPhone XR is as same as that of the original after changing a new back glass? Maybe you know how to replace the back glass, but do not know how to make the thickness be the same as the original.

So today, we would like to show you how to do it.

Now, let’s begin.

The Best Way To Replace iPhone XR Back Glass

First, laser the back glass.

We put the whole phone into Blue Light Laser Separation Machine to laser the back glass so that we can easily remove the back glass, by then.

The Best Way To Replace iPhone XR Back Glass

Second, back glass removing.

The master will use a blade and a sharp knife to remove the back glass.

The back glass is very easy to be separated after doing laser. That’s why we choose to use blue light laser machine to separate the back glass. It can reduce the tear down difficulty of iPhone.

This is the final effect after taking apart the back glass.

Third, Cleaning.

Before cleaning black things. We should clean the glass around the edge with a small tool.

Once done, we continue to clean black things with clean cloth and alcohol.

Now, we’ve already clean up black things and finally there are many glue remaining. These glues are really useful because they are the key point to keep the same thickness as the original one.

Forth, new glue adding.

Here we add new glue around the phone body and blank place without glue.

You can see the final looking after adding glue in below picture.

Fifth, install a new back glass.

Stick a new back glass on the phone and use four clamping tool to hold the pressure.

The total replacement has been finished now. This is the final effect which the phone looks like as perfect as the original one.

The more details, you can watch our Youtube video: 

Never Remove The Glue Inside Phone To Keep The Original Thickness, iPhone XR Back Glass Replacement

Thank you for your reading.

Leave a Reply

Your email address will not be published.