Using Laser Separation Machine Very Simple And Easy To Replacement MI 8 Cracked Glass

0 comments

We have changed the MI 8 broken glass without teardown the cellphone these days. How can we do that? We have two good helpers – one is the Laser separation Machine, the other is RMB-1 laminator machine. Maybe you would like to get some details about these two products, please looking forward in below.

Laser Separation Machine

So, now let’s begin to do it.

The first part we need to do is removing the cracked glass without cellphone teardown by using Laser Separation Machine.

Using Laser Separation Machine To Replacement MI 8 Cracked Glass

For this part, we test focal length with the intelligent ranging system at first.

Using Laser Separation Machine To Replacement MI 8 Cracked Glass

Then use an automatic centralization structure to center the screen automatically.

Using Laser Separation Machine To Replacement MI 8 Cracked Glass

After that, we heat the phone on the heating platform.

Using Laser Separation Machine To Replacement MI 8 Cracked Glass

Once done, open a small gap with a blade and small plastics.

Using Laser Separation Machine To Replacement MI 8 Cracked Glass

The next part is laser separating the cracked glass with gold steel wire.

Using Laser Separation Machine To Replacement MI 8 Cracked Glass

Once finished, we need to clean up the residual glue.

Using Laser Separation Machine To Replacement MI 8 Cracked Glass

Then put new OCA to the new glass.

Using Laser Separation Machine To Replacement MI 8 Cracked Glass

And apply the bezel glue around the sides.

Using Laser Separation Machine To Replacement MI 8 Cracked Glass

Before we laminate the screen with RMB-1 Laminator Machine, we have to put the glass on the screen.

Using Laser Separation Machine To Replacement MI 8 Cracked Glass

Then place the screen into RMB-1 machine for lamination in 100 seconds.

Using Laser Separation Machine To Replacement MI 8 Cracked Glass

Once done, if the screen has some bubbles on it, we should put it into the bubble remover for defoaming. This process needs to take 5 minutes.

Using Laser Separation Machine To Replacement MI 8 Cracked Glass

The final part is testing the phone after the repair.

Using Laser Separation Machine To Replacement MI 8 Cracked Glass

The refurbishment is finished once confirm the display and the touch is on work.

Don’t you think that it is very simple and easy for you to restore the cracked glass of the cellphones?

Welcome to click the below relative products if you want to get more information.

20W Powerful Fiber Laser Separating & Marking Machinehttps://www.forwardgd.com/products/lcd-separatorhttps://www.forwardgd.com/products/rmb-lamination-machine

Thanks.

Leave a comment

All blog comments are checked prior to publishing
[time] minutes ago, from [location] vor [time] Minuten, von [location]
The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
You have successfully subscribed!